profiles/internal/rpc/stream/message/control.go - release.go.x.ref - Git at Google

 // Copyright 2015 The Vanadium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.

 package message

 import (
 	"bytes"
 	"fmt"
 	"io"

 	"v.io/v23/naming"
 	"v.io/v23/verror"

 	inaming "v.io/x/ref/profiles/internal/naming"
 	"v.io/x/ref/profiles/internal/rpc/stream/crypto"
 	"v.io/x/ref/profiles/internal/rpc/stream/id"
 	"v.io/x/ref/profiles/internal/rpc/version"
 )

 var (
 	// These errors are intended to be used as arguments to higher
 	// level errors and hence {1}{2} is omitted from their format
 	// strings to avoid repeating these n-times in the final error
 	// message visible to the user.
 	errUnrecognizedVCControlMessageCommand = reg(".errUnrecognizedVCControlMessageCommand",
 		"unrecognized VC control message command({3})")
 	errUnrecognizedVCControlMessageType = reg(".errUnrecognizedVCControlMessageType",
 		"unrecognized VC control message type({3})")
 	errFailedToDeserializedVCControlMessage = reg(".errFailedToDeserializedVCControlMessage", "failed to deserialize control message {3}({4}): {5}")
 	errFailedToWriteHeader                  = reg(".errFailedToWriteHeader", "failed to write header. Wrote {3} bytes instead of {4}{:5}")
 )

 // Control is the interface implemented by all control messages.
 type Control interface {
 	readFrom(r *bytes.Buffer) error
 	writeTo(w io.Writer) error
 }

 // SetupVC is a Control implementation containing information to setup a new
 // virtual circuit.
 type SetupVC struct {
 	VCI            id.VC
 	LocalEndpoint  naming.Endpoint // Endpoint of the sender (as seen by the sender), can be nil.
 	RemoteEndpoint naming.Endpoint // Endpoint of the receiver (as seen by the sender), can be nil.
 	Counters       Counters
 	Setup          Setup // Negotiate versioning and encryption.
 }

 // CloseVC is a Control implementation notifying the closure of an established
 // virtual circuit, or failure to establish a virtual circuit.
 //
 // The Error string will be empty in case the close was the result of an
 // explicit close by the application (and not an error).
 type CloseVC struct {
 	VCI   id.VC
 	Error string
 }

 // AddReceiveBuffers is a Control implementation used by the sender of the
 // message to inform the other end of a virtual circuit that it is ready to
 // receive more bytes of data (specified per flow).
 type AddReceiveBuffers struct {
 	Counters Counters
 }

 // OpenFlow is a Control implementation notifying the senders intent to create
 // a new Flow. It also include the number of bytes the sender of this message
 // is willing to read.
 type OpenFlow struct {
 	VCI             id.VC
 	Flow            id.Flow
 	InitialCounters uint32
 }

 // Setup is a control message used to negotiate VIF/VC options.
 type Setup struct {
 	Versions version.Range
 	Options  []SetupOption
 }

 // SetupOption is the base interface for optional Setup options.
 type SetupOption interface {
 	// code is the identifier for the option.
 	code() setupOptionCode

 	// size returns the number of bytes needed to represent the option.
 	size() uint16

 	// write the option to the writer.
 	write(w io.Writer) error

 	// read the option from the reader.
 	read(r io.Reader) error
 }

 // NaclBox is a SetupOption that specifies the public key for the NaclBox
 // encryption protocol.
 type NaclBox struct {
 	PublicKey crypto.BoxKey
 }

 // SetupStream is a byte stream used to negotiate VIF setup.  During VIF setup,
 // each party sends a Setup message to the other party containing their version
 // and options.  If the version requires further negotiation (such as for authentication),
 // the SetupStream is used for the negotiation.
 //
 // The protocol used on the stream is version-specific, it is not specified here.  See
 // vif/auth.go for an example.
 type SetupStream struct {
 	Data []byte
 }

 // Setup option codes.
 type setupOptionCode uint16

 const (
 	naclBoxPublicKey setupOptionCode = 0
 )

 // Command enum.
 type command uint8

 const (
 	deprecatedOpenVCCommand  command = 0
 	closeVCCommand           command = 1
 	addReceiveBuffersCommand command = 2
 	openFlowCommand          command = 3
 	hopSetupCommand          command = 4
 	hopSetupStreamCommand    command = 5
 	setupVCCommand           command = 6
 )

 func writeControl(w io.Writer, m Control) error {
 	var command command
 	switch m.(type) {
 	case *CloseVC:
 		command = closeVCCommand
 	case *AddReceiveBuffers:
 		command = addReceiveBuffersCommand
 	case *OpenFlow:
 		command = openFlowCommand
 	case *Setup:
 		command = hopSetupCommand
 	case *SetupStream:
 		command = hopSetupStreamCommand
 	case *SetupVC:
 		command = setupVCCommand
 	default:
 		return verror.New(errUnrecognizedVCControlMessageType, nil, fmt.Sprintf("%T", m))
 	}
 	var header [1]byte
 	header[0] = byte(command)
 	if n, err := w.Write(header[:]); n != len(header) || err != nil {
 		return verror.New(errFailedToWriteHeader, nil, n, len(header), err)
 	}
 	if err := m.writeTo(w); err != nil {
 		return err
 	}
 	return nil
 }

 func readControl(r *bytes.Buffer) (Control, error) {
 	var header byte
 	var err error
 	if header, err = r.ReadByte(); err != nil {
 		return nil, err
 	}
 	command := command(header)
 	var m Control
 	switch command {
 	case closeVCCommand:
 		m = new(CloseVC)
 	case addReceiveBuffersCommand:
 		m = new(AddReceiveBuffers)
 	case openFlowCommand:
 		m = new(OpenFlow)
 	case hopSetupCommand:
 		m = new(Setup)
 	case hopSetupStreamCommand:
 		m = new(SetupStream)
 	case setupVCCommand:
 		m = new(SetupVC)
 	default:
 		return nil, verror.New(errUnrecognizedVCControlMessageCommand, nil, command)
 	}
 	if err := m.readFrom(r); err != nil {
 		return nil, verror.New(errFailedToDeserializedVCControlMessage, nil, command, fmt.Sprintf("%T", m), err)
 	}
 	return m, nil
 }

 func (m *CloseVC) writeTo(w io.Writer) (err error) {
 	if err = writeInt(w, m.VCI); err != nil {
 		return
 	}
 	if err = writeString(w, m.Error); err != nil {
 		return
 	}
 	return
 }

 func (m *CloseVC) readFrom(r *bytes.Buffer) (err error) {
 	if err = readInt(r, &m.VCI); err != nil {
 		return
 	}
 	if err = readString(r, &m.Error); err != nil {
 		return
 	}
 	return
 }

 func (m *SetupVC) writeTo(w io.Writer) (err error) {
 	if err = writeInt(w, m.VCI); err != nil {
 		return
 	}
 	var localep string
 	if m.LocalEndpoint != nil {
 		localep = m.LocalEndpoint.String()
 	}
 	if err = writeString(w, localep); err != nil {
 		return
 	}
 	var remoteep string
 	if m.RemoteEndpoint != nil {
 		remoteep = m.RemoteEndpoint.String()
 	}
 	if err = writeString(w, remoteep); err != nil {
 		return
 	}
 	if err = writeCounters(w, m.Counters); err != nil {
 		return
 	}
 	if err = m.Setup.writeTo(w); err != nil {
 		return
 	}
 	return
 }

 func (m *SetupVC) readFrom(r *bytes.Buffer) (err error) {
 	if err = readInt(r, &m.VCI); err != nil {
 		return
 	}
 	var ep string
 	if err = readString(r, &ep); err != nil {
 		return
 	}
 	if ep != "" {
 		if m.LocalEndpoint, err = inaming.NewEndpoint(ep); err != nil {
 			return
 		}
 	}
 	if err = readString(r, &ep); err != nil {
 		return
 	}
 	if ep != "" {
 		if m.RemoteEndpoint, err = inaming.NewEndpoint(ep); err != nil {
 			return
 		}
 	}
 	if m.Counters, err = readCounters(r); err != nil {
 		return
 	}
 	if err = m.Setup.readFrom(r); err != nil {
 		return
 	}
 	return
 }

 func (m *AddReceiveBuffers) writeTo(w io.Writer) error {
 	return writeCounters(w, m.Counters)
 }

 func (m *AddReceiveBuffers) readFrom(r *bytes.Buffer) (err error) {
 	m.Counters, err = readCounters(r)
 	return
 }

 func (m *OpenFlow) writeTo(w io.Writer) (err error) {
 	if err = writeInt(w, m.VCI); err != nil {
 		return
 	}
 	if err = writeInt(w, m.Flow); err != nil {
 		return
 	}
 	if err = writeInt(w, m.InitialCounters); err != nil {
 		return
 	}
 	return
 }

 func (m *OpenFlow) readFrom(r *bytes.Buffer) (err error) {
 	if err = readInt(r, &m.VCI); err != nil {
 		return
 	}
 	if err = readInt(r, &m.Flow); err != nil {
 		return
 	}
 	if err = readInt(r, &m.InitialCounters); err != nil {
 		return
 	}
 	return
 }

 func (m *Setup) writeTo(w io.Writer) (err error) {
 	if err = writeInt(w, m.Versions.Min); err != nil {
 		return
 	}
 	if err = writeInt(w, m.Versions.Max); err != nil {
 		return
 	}
 	if err = writeSetupOptions(w, m.Options); err != nil {
 		return
 	}
 	return
 }

 func (m *Setup) readFrom(r *bytes.Buffer) (err error) {
 	if err = readInt(r, &m.Versions.Min); err != nil {
 		return
 	}
 	if err = readInt(r, &m.Versions.Max); err != nil {
 		return
 	}
 	if m.Options, err = readSetupOptions(r); err != nil {
 		return
 	}
 	return
 }

 // NaclBox returns the first NaclBox option, or nil if there is none.
 func (m *Setup) NaclBox() *NaclBox {
 	for _, opt := range m.Options {
 		if b, ok := opt.(*NaclBox); ok {
 			return b
 		}
 	}
 	return nil
 }

 func (*NaclBox) code() setupOptionCode {
 	return naclBoxPublicKey
 }

 func (m *NaclBox) size() uint16 {
 	return uint16(len(m.PublicKey))
 }

 func (m *NaclBox) write(w io.Writer) error {
 	_, err := w.Write(m.PublicKey[:])
 	return err
 }

 func (m *NaclBox) read(r io.Reader) error {
 	_, err := io.ReadFull(r, m.PublicKey[:])
 	return err
 }

 func (m *SetupStream) writeTo(w io.Writer) error {
 	_, err := w.Write(m.Data)
 	return err
 }

 func (m *SetupStream) readFrom(r *bytes.Buffer) error {
 	m.Data = r.Bytes()
 	return nil
 }
	// Copyright 2015 The Vanadium Authors. All rights reserved.
	// Use of this source code is governed by a BSD-style
	// license that can be found in the LICENSE file.

	package message

	import (
	"bytes"
	"fmt"
	"io"

	"v.io/v23/naming"
	"v.io/v23/verror"

	inaming "v.io/x/ref/profiles/internal/naming"
	"v.io/x/ref/profiles/internal/rpc/stream/crypto"
	"v.io/x/ref/profiles/internal/rpc/stream/id"
	"v.io/x/ref/profiles/internal/rpc/version"
	)

	var (
	// These errors are intended to be used as arguments to higher
	// level errors and hence {1}{2} is omitted from their format
	// strings to avoid repeating these n-times in the final error
	// message visible to the user.
	errUnrecognizedVCControlMessageCommand = reg(".errUnrecognizedVCControlMessageCommand",
	"unrecognized VC control message command({3})")
	errUnrecognizedVCControlMessageType = reg(".errUnrecognizedVCControlMessageType",
	"unrecognized VC control message type({3})")
	errFailedToDeserializedVCControlMessage = reg(".errFailedToDeserializedVCControlMessage", "failed to deserialize control message {3}({4}): {5}")
	errFailedToWriteHeader = reg(".errFailedToWriteHeader", "failed to write header. Wrote {3} bytes instead of {4}{:5}")
	)

	// Control is the interface implemented by all control messages.
	type Control interface {
	readFrom(r *bytes.Buffer) error
	writeTo(w io.Writer) error
	}

	// SetupVC is a Control implementation containing information to setup a new
	// virtual circuit.
	type SetupVC struct {
	VCI id.VC
	LocalEndpoint naming.Endpoint // Endpoint of the sender (as seen by the sender), can be nil.
	RemoteEndpoint naming.Endpoint // Endpoint of the receiver (as seen by the sender), can be nil.
	Counters Counters
	Setup Setup // Negotiate versioning and encryption.
	}

	// CloseVC is a Control implementation notifying the closure of an established
	// virtual circuit, or failure to establish a virtual circuit.
	//
	// The Error string will be empty in case the close was the result of an
	// explicit close by the application (and not an error).
	type CloseVC struct {
	VCI id.VC
	Error string
	}

	// AddReceiveBuffers is a Control implementation used by the sender of the
	// message to inform the other end of a virtual circuit that it is ready to
	// receive more bytes of data (specified per flow).
	type AddReceiveBuffers struct {
	Counters Counters
	}

	// OpenFlow is a Control implementation notifying the senders intent to create
	// a new Flow. It also include the number of bytes the sender of this message
	// is willing to read.
	type OpenFlow struct {
	VCI id.VC
	Flow id.Flow
	InitialCounters uint32
	}

	// Setup is a control message used to negotiate VIF/VC options.
	type Setup struct {
	Versions version.Range
	Options []SetupOption
	}

	// SetupOption is the base interface for optional Setup options.
	type SetupOption interface {
	// code is the identifier for the option.
	code() setupOptionCode

	// size returns the number of bytes needed to represent the option.
	size() uint16

	// write the option to the writer.
	write(w io.Writer) error

	// read the option from the reader.
	read(r io.Reader) error
	}

	// NaclBox is a SetupOption that specifies the public key for the NaclBox
	// encryption protocol.
	type NaclBox struct {
	PublicKey crypto.BoxKey
	}

	// SetupStream is a byte stream used to negotiate VIF setup. During VIF setup,
	// each party sends a Setup message to the other party containing their version
	// and options. If the version requires further negotiation (such as for authentication),
	// the SetupStream is used for the negotiation.
	//
	// The protocol used on the stream is version-specific, it is not specified here. See
	// vif/auth.go for an example.
	type SetupStream struct {
	Data []byte
	}

	// Setup option codes.
	type setupOptionCode uint16

	const (
	naclBoxPublicKey setupOptionCode = 0
	)

	// Command enum.
	type command uint8

	const (
	deprecatedOpenVCCommand command = 0
	closeVCCommand command = 1
	addReceiveBuffersCommand command = 2
	openFlowCommand command = 3
	hopSetupCommand command = 4
	hopSetupStreamCommand command = 5
	setupVCCommand command = 6
	)

	func writeControl(w io.Writer, m Control) error {
	var command command
	switch m.(type) {
	case *CloseVC:
	command = closeVCCommand
	case *AddReceiveBuffers:
	command = addReceiveBuffersCommand
	case *OpenFlow:
	command = openFlowCommand
	case *Setup:
	command = hopSetupCommand
	case *SetupStream:
	command = hopSetupStreamCommand
	case *SetupVC:
	command = setupVCCommand
	default:
	return verror.New(errUnrecognizedVCControlMessageType, nil, fmt.Sprintf("%T", m))
	}
	var header [1]byte
	header[0] = byte(command)
	if n, err := w.Write(header[:]); n != len(header) \|\| err != nil {
	return verror.New(errFailedToWriteHeader, nil, n, len(header), err)
	}
	if err := m.writeTo(w); err != nil {
	return err
	}
	return nil
	}

	func readControl(r *bytes.Buffer) (Control, error) {
	var header byte
	var err error
	if header, err = r.ReadByte(); err != nil {
	return nil, err
	}
	command := command(header)
	var m Control
	switch command {
	case closeVCCommand:
	m = new(CloseVC)
	case addReceiveBuffersCommand:
	m = new(AddReceiveBuffers)
	case openFlowCommand:
	m = new(OpenFlow)
	case hopSetupCommand:
	m = new(Setup)
	case hopSetupStreamCommand:
	m = new(SetupStream)
	case setupVCCommand:
	m = new(SetupVC)
	default:
	return nil, verror.New(errUnrecognizedVCControlMessageCommand, nil, command)
	}
	if err := m.readFrom(r); err != nil {
	return nil, verror.New(errFailedToDeserializedVCControlMessage, nil, command, fmt.Sprintf("%T", m), err)
	}
	return m, nil
	}

	func (m *CloseVC) writeTo(w io.Writer) (err error) {
	if err = writeInt(w, m.VCI); err != nil {
	return
	}
	if err = writeString(w, m.Error); err != nil {
	return
	}
	return
	}

	func (m CloseVC) readFrom(r bytes.Buffer) (err error) {
	if err = readInt(r, &m.VCI); err != nil {
	return
	}
	if err = readString(r, &m.Error); err != nil {
	return
	}
	return
	}

	func (m *SetupVC) writeTo(w io.Writer) (err error) {
	if err = writeInt(w, m.VCI); err != nil {
	return
	}
	var localep string
	if m.LocalEndpoint != nil {
	localep = m.LocalEndpoint.String()
	}
	if err = writeString(w, localep); err != nil {
	return
	}
	var remoteep string
	if m.RemoteEndpoint != nil {
	remoteep = m.RemoteEndpoint.String()
	}
	if err = writeString(w, remoteep); err != nil {
	return
	}
	if err = writeCounters(w, m.Counters); err != nil {
	return
	}
	if err = m.Setup.writeTo(w); err != nil {
	return
	}
	return
	}

	func (m SetupVC) readFrom(r bytes.Buffer) (err error) {
	if err = readInt(r, &m.VCI); err != nil {
	return
	}
	var ep string
	if err = readString(r, &ep); err != nil {
	return
	}
	if ep != "" {
	if m.LocalEndpoint, err = inaming.NewEndpoint(ep); err != nil {
	return
	}
	}
	if err = readString(r, &ep); err != nil {
	return
	}
	if ep != "" {
	if m.RemoteEndpoint, err = inaming.NewEndpoint(ep); err != nil {
	return
	}
	}
	if m.Counters, err = readCounters(r); err != nil {
	return
	}
	if err = m.Setup.readFrom(r); err != nil {
	return
	}
	return
	}

	func (m *AddReceiveBuffers) writeTo(w io.Writer) error {
	return writeCounters(w, m.Counters)
	}

	func (m AddReceiveBuffers) readFrom(r bytes.Buffer) (err error) {
	m.Counters, err = readCounters(r)
	return
	}

	func (m *OpenFlow) writeTo(w io.Writer) (err error) {
	if err = writeInt(w, m.VCI); err != nil {
	return
	}
	if err = writeInt(w, m.Flow); err != nil {
	return
	}
	if err = writeInt(w, m.InitialCounters); err != nil {
	return
	}
	return
	}

	func (m OpenFlow) readFrom(r bytes.Buffer) (err error) {
	if err = readInt(r, &m.VCI); err != nil {
	return
	}
	if err = readInt(r, &m.Flow); err != nil {
	return
	}
	if err = readInt(r, &m.InitialCounters); err != nil {
	return
	}
	return
	}

	func (m *Setup) writeTo(w io.Writer) (err error) {
	if err = writeInt(w, m.Versions.Min); err != nil {
	return
	}
	if err = writeInt(w, m.Versions.Max); err != nil {
	return
	}
	if err = writeSetupOptions(w, m.Options); err != nil {
	return
	}
	return
	}

	func (m Setup) readFrom(r bytes.Buffer) (err error) {
	if err = readInt(r, &m.Versions.Min); err != nil {
	return
	}
	if err = readInt(r, &m.Versions.Max); err != nil {
	return
	}
	if m.Options, err = readSetupOptions(r); err != nil {
	return
	}
	return
	}

	// NaclBox returns the first NaclBox option, or nil if there is none.
	func (m Setup) NaclBox() NaclBox {
	for _, opt := range m.Options {
	if b, ok := opt.(*NaclBox); ok {
	return b
	}
	}
	return nil
	}

	func (*NaclBox) code() setupOptionCode {
	return naclBoxPublicKey
	}

	func (m *NaclBox) size() uint16 {
	return uint16(len(m.PublicKey))
	}

	func (m *NaclBox) write(w io.Writer) error {
	_, err := w.Write(m.PublicKey[:])
	return err
	}

	func (m *NaclBox) read(r io.Reader) error {
	_, err := io.ReadFull(r, m.PublicKey[:])
	return err
	}

	func (m *SetupStream) writeTo(w io.Writer) error {
	_, err := w.Write(m.Data)
	return err
	}

	func (m SetupStream) readFrom(r bytes.Buffer) error {
	m.Data = r.Bytes()
	return nil
	}